AJAS Cover
Frequency: Continuous
ISSN: 1546-9239 (Print)
ISSN: 1554-3641 (Online)
Research Article Open Access

Photoacoustic Measurement of Thermal Diffusivity of Polypyrrole Conducting Polymer Composite Films

M. Y. Lim, W. Mahmood Mat Yunus, A. Kassim and H.N.M.E. Mahmud

Abstract

The thermal diffusivity has been measured for the Polypyrrole-Polyethylene Glycol (PPy-PEG) composite films by the open photoacoustic method. The experimental data were analyzed for thermal diffusivity by fitting procedure. The different process parameters such as different concentrations of insulating polymer, monomer and electrolyte and the different voltages used to prepare the PPy-PEG composite films brought changes in thermal diffusivity. The process condition of 0.20 M pyrrole, 0.10 M p-toluene sulfonate and 1×10-3 M PEG at 1.20 volt (vs SCE) appeared as the optimum condition and the PPy-PEG composite film produced from this optimum condition shows the highest thermal diffusivity (7.88×10-7 m2 s-1).

American Journal of Applied Sciences
Volume 6 No. 2, 2009, 313-316

DOI: https://doi.org/10.3844/ajassp.2009.313.316

Submitted On: 14 March 2008 Published On: 28 February 2009

How to Cite: Lim, M. Y., Yunus, W. M. M., Kassim, A. & Mahmud, H. (2009). Photoacoustic Measurement of Thermal Diffusivity of Polypyrrole Conducting Polymer Composite Films . American Journal of Applied Sciences, 6(2), 313-316. https://doi.org/10.3844/ajassp.2009.313.316

Open AccessCopyright: © 2009 M. Y. Lim, W. Mahmood Mat Yunus, A. Kassim and H.N.M.E. Mahmud. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.

  • 3,696 Views
  • 3,126 Downloads
  • 11 Citations

Download

Keywords

  • Polypyrrole,polyethylene glycol
  • thermal diffusivity
  • photoacoustic method