Development of a Magnetorheological Finishing Machine for Small-Bore Part of Irregular Shape and Experimental Study
- 1 Harbin Institute of Technology, China
Abstract
Magnetorheological finishing machine tool with small ball-end permanent-magnet polishing head is proposed as a method to solve the problem that small-bore parts of irregular shape with small curvature radius concave surface cannot be polished by traditional magnetorheological finishing machine tool. The four-axis linkage magnetorheological finishing machine tool with modular open numerical system and easy-operating man-machine interactive interface is developed. Then the machine tool is used to study the removal characteristics on machining parameters. It is indicated that the removal rate is not sensitive to processing time. When the angle between the polishing head and the workpiece is larger, the removal rate is higher. The surface roughness of workpiece can be less than 3 nm, which is machined by magnetorheological polishing with a small permanent magnet ball-end tool.
DOI: https://doi.org/10.3844/ajeassp.2015.399.404
Copyright: © 2015 Wang Tingzhang, Chen Mingjun, Liu Henan and Xu Jiang. This is an open access article distributed under the terms of the
Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
- 3,918 Views
- 2,901 Downloads
- 10 Citations
Download
Keywords
- Magnetorheological Finishing
- Small Ball-End Tool
- Process Experiment