AJEAS Cover
Frequency: Quarterly
ISSN: 1941-7020 (Print)
ISSN: 1941-7039 (Online)
Research Article Open Access

Dynamic Mechanical Properties of Fused Deposition Modelling Processed Polyphenylsulfone Material

Bolin Huang1, S.H. Masood1, Mostafa Nikzad1, Prabhu Raja Venugopal2 and Adhiyamaan Arivazhagan2
  • 1 Swinburne University of Technology, Australia
  • 2 PSG College of Technology, India

Abstract

Fused Deposition Modelling (FDM) has attained its reputation due to the capability of rapidly fabricating prototypes from concept design to real parts in shorter time and lower cost than traditional manufacturing processes. This study sheds light on the dynamic mechanical properties of Polyphenylsulfone (PPSF) material fabricated by FDM additive manufacturing process considering the effect of its various process parameters. Three major FDM process parameters are considered in this study, namely, raster angle, raster width and build style. Dynamic Mechanical Analysis is carried out with sweeping temperature at three different fixed frequencies, e.g., 1 Hz, 50 Hz and 100 Hz. Taguchi method is employed for the optimization of process parameters towards achieving better damping properties. Experimental results such as maximum storage modulus, maximum loss modulus, peak of Tan Delta and maximum complex viscosity are captured and the effects of process parameters on these damping properties of PPSF samples are investigated.

American Journal of Engineering and Applied Sciences
Volume 9 No. 1, 2016, 1-11

DOI: https://doi.org/10.3844/ajeassp.2016.1.11

Submitted On: 1 June 2015 Published On: 16 July 2015

How to Cite: Huang, B., Masood, S., Nikzad, M., Venugopal, P. R. & Arivazhagan, A. (2016). Dynamic Mechanical Properties of Fused Deposition Modelling Processed Polyphenylsulfone Material. American Journal of Engineering and Applied Sciences, 9(1), 1-11. https://doi.org/10.3844/ajeassp.2016.1.11

Open AccessCopyright: © 2016 Bolin Huang, S.H. Masood, Mostafa Nikzad, Prabhu Raja Venugopal and Adhiyamaan Arivazhagan. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.

  • 4,299 Views
  • 3,537 Downloads
  • 21 Citations

Download

Keywords

  • Fused Deposition Modelling
  • Dynamic Mechanical Analysis
  • PPSF
  • Process Parameters
  • Taguchi